Your partner in electrical work & energy across Belgium.
From the distribution board to the control system. Electrical work, home automation and data networks we do within 50 km of Vilvoorde. Solar panels, battery storage, energy management and charging points we install throughout Belgium.
- Sigenergy
- SolarEdge
- SMA
- Alfen
- Peblar
- Tesla
- Niko
- Schneider
Seven disciplines, one point of contact.
We carry out the classic electrical work and the energy installations ourselves. That saves you coordinating three contractors who point at each other.
Electrical work
New build, renovation and extension. Cabling, distribution boards, lighting, sockets and data lines, neatly finished and to plan.
Home automation
Lighting, screens, heating, ventilation and access on one control system. We program it ourselves, so you do not have to call a third party for a change.
Data networks and telecom
Cabling, patch cabinets, wifi and fibre. Networks that stay stable when more devices are added later, in a house as much as in an office.
Solar panels
Roof study, installation, inverter and cabling right into the board. Inspection and registration with the grid operator included, on a house, an industrial roof or a ground-mounted array.
Battery storage
From a home battery to industrial storage. Use the day's own power in the evening, flatten your peak demand and provide back-up where it is needed.
Energy management
One system that matches solar, battery, loads and charging points, taking the Belgian capacity tariff and dynamic prices into account.
EV charging
AC charging points and DC fast chargers, with load balancing so that in most cases your connection does not need upgrading.
Separate installations return less than one whole.
Panels from one contractor, a battery from another and a charging point from a third: it works, but nobody controls it together. We lay the whole chain and put one control system on it.
Who we work for.
New build
The complete electrical package from the shell stage onwards, in consultation with the client and the architect. Prepared for automation and solar, even if you add those later.
Renovation
Renewing or extending an existing installation, with a board that is compliant again. Also in an occupied home, with as little breaking work as possible.
SME and office
Lighting, boards, data and the energy installation around it. Where needed we plan outside opening hours so your operation keeps running.
Apartments and property managers
Charging infrastructure on shared car parks, with separate metering per resident and a layout that stays expandable.
From the first phone call to an inspected installation.
How long it takes depends on the scope and on the grid operator. You hear the timeline before you sign, not after.
We come on site, record the existing board and the cable route and go through what you want to achieve. You hear straight away what is technically feasible and what is not.
All parts in one quote: materials, labour, inspection and the subsidies you are entitled to. Once agreed, we fix the working dates.
The owner works on site himself and follows up every job. You have one point of contact from start to finish, not changing faces who refer to each other.
An accredited inspector comes round. You receive the report, the single-line diagram and the site plan digitally, plus an explanation of how to operate the installation.
Work from our own sites.
Photos of installations we placed ourselves, not stock imagery.
Where we work.
Our working area differs per discipline. Jobs that take many days on site we keep close to home. For energy installations we travel across the country.
Solar panels, battery storage, energy management and charging points
All of Belgium
From the coast to the Ardennes. These are installations we complete in a few days and for which travel is included in the quote.
Electrical work, home automation and data networks
50 km around Vilvoorde
These are jobs that run for weeks and where we often have to come back. We deliberately keep those within driving distance.
Municipalities within 50 km
Measured as the crow flies from Vilvoorde, nearest first. Is your municipality just outside? Give us a call and we will look at it.
- Vilvoorde
- Machelen
- Grimbergen
- Zaventem
- Steenokkerzeel
- Zemst
- Meise
- Kraainem
- Wemmel
- Kampenhout
- Kortenberg
- Wezembeek-Oppem
- Brussels
- Kapelle-op-den-Bos
- Mechelen
- Boortmeerbeek
- Londerzeel
- Bonheiden
- Tervuren
- Dilbeek
- Merchtem
- Haacht
- Willebroek
- Asse
- Keerbergen
- Rumst
- Herent
- Sint-Katelijne-Waver
- Opwijk
- Hoeilaart
- Boom
- Buggenhout
- Overijse
- Ternat
- Puurs-Sint-Amands
- Duffel
- Leuven
- Putte
- Oud-Heverlee
- Beersel
- Rotselaar
- Sint-Genesius-Rode
- Sint-Pieters-Leeuw
- Tremelo
- Waterloo
- Lier
- Dendermonde
- Halle
- Heist-op-den-Berg
- Wavre
- Temse
- Aalst
- Aarschot
- Ninove
- Antwerp
- Sint-Niklaas
- Lokeren
- Nivelles
- Tienen
- Herentals
- Geraardsbergen
- Diest
Frequently asked questions
Yes. An extra circuit, a light point or a board that is no longer compliant counts just as much as a full installation. You get a price up front, for small jobs too.
For solar panels, battery storage, energy management and charging points we come anywhere in Belgium. For electrical work, home automation and data networks we stay within 50 km of Vilvoorde. That is a deliberate choice: those jobs run for weeks and require us to come back easily.
It depends on the distance to the board, the state of your installation and whether digging is needed. That is why we only give a price after the site visit, and then it is a fixed price, not an estimate.
No. We lay the cabling and reserve the space in the board, so whatever you add later can be connected without breaking open again.
Yes. UTP and fibre, with a patch cabinet and wifi that covers the whole building. We lay that during the electrical work, which saves a lot of extra breaking work afterwards.
We do. We produce the single-line diagram and the site plan, arrange the appointment with an accredited inspector and follow up any remarks ourselves. We also handle the registration of solar panels with the grid operator.
Mainly Loxone and KNX, and Niko Home Control for simpler homes. We program it ourselves, so a later change does not have to go through an external integrator.
Monday to Friday from 8 to 17 on +32 470 53 32 92 or at info@electrifusion.be. Outside those hours you are welcome to leave a message and we will call back the next working day.
The work we carry out comes with a two-year warranty, the materials with the manufacturer’s warranty. If something goes wrong on an installation of ours, we come and put it right.
Got a project in mind?
Call +32 470 53 32 92 or send your request, Monday to Friday from 8 to 17. You get an answer within two working days.